Adjustable Angle Welding Magnet – 20°–200° Magnetic Welding Holder wit

1/8

Adjustable Angle Welding Magnet – 20°–200° Magnetic Welding Holder with Locking Hex System

★ ★ ★ ★ ★ ★

4.5/5 (1,334 Reviews)

$54.99

A Better Way To Set Up Your Weld

Stop Fighting
Awkward Fit-Ups.

Trying to hold steel, maintain an angle and prepare a tack at the same time turns a simple setup into a juggling act. Give the workpiece its own support instead.

× Parts shifting while you measure and align

× Fixed-angle magnets that don't match the job

× Using one hand just to keep the workpiece in place

Adjustable magnetic welding holder being positioned and used during welding

Awkward angle? Slipping workpiece?

Adjust it. Lock it. Position your steel.

20°–200° Adjustable positioning

48 / 77 lb Holding options

Hex Lock Secure the chosen angle

Reusable Reset it for the next job

The Simple Solution

Hold The Angle You Actually Need.

The Adjustable Angle Welding Magnet combines magnetic workpiece positioning with a movable center joint, letting you configure the holder for different steel fabrication setups instead of relying on only a few fixed angles.

↔

Adjust The Fit-Up

Move the two magnetic arms through a 20°–200° working range to suit different joints and assemblies.

⬢

Lock Your Position

Once the angle is set, tighten the center joint with the included hex wrench to help keep the selected position.

Support Compatible Steel

Magnetic contact surfaces help hold suitable ferromagnetic workpieces while you align, measure and prepare your joint.

77 pound adjustable angle magnetic welding holder positioning steel

Shown: 77 lb option

Less Juggling During Setup

Keep Both Hands Available For The Work That Matters.

Workpiece positioning is often the frustrating part before the weld even begins. Magnetic support helps keep compatible steel where you put it while you focus on alignment and tack preparation.

Easier positioning: support the workpiece without constantly holding it by hand.
Better access: keep your hands available for measuring and alignment.
Reusable setup tool: unlock it, change the angle and move on to the next assembly.

Adjustable welding magnet shown at different working angles

Shown: 77 lb option

More Than A Fixed-Angle Magnet

One Holder. More Ways To Fit The Job.

Instead of being limited to one preset corner, the pivoting design lets you adapt the holder to a wider range of fabrication setups.

20°–200° Adjustable working range with visible angle markings

Useful for straight, acute and wide-angle positioning
Visible scale gives you a reference while setting the joint
Lock the pivot after choosing your working position

48 pound adjustable welding magnet gripping a steel surface

Shown: 48 lb option

Magnetic Workpiece Support

Help Keep Compatible Steel Where You Put It.

The magnetic contact faces are designed for suitable ferromagnetic steel, helping stabilize workpieces during positioning, fit-up and assembly.

48 lb and 77 lb options let you choose the model that suits your setup.
Compact contact profile keeps the positioning tool close to the work area.
No separate clamp adjustment is needed to create the magnetic contact.

Detail view of welding magnet angle lock, angle scale, hex wrench and wrench storage

Designed Around The Setup

Small Details That Make Positioning Easier.

Adjustable Center Pivot Move the magnetic arms to suit different joint configurations.

Visible Angle Scale Use the markings as a quick reference while setting your position.

Hex Locking System Tighten the pivot after adjusting the angle.

Included Hex Wrench The tool needed for adjustment and locking comes with the holder.

Straightforward Setup

Adjust. Lock. Position. Work.

Four simple steps get the holder ready for your fabrication setup.

Loosen Loosen the locking joint so the magnetic arms can move.

Adjust Move the arms to the angle needed for your workpiece.

Lock Tighten the joint with the included hex wrench.

Position Place the magnetic faces firmly against compatible steel.

Four step process for adjusting, locking, positioning and using the welding magnet

Application sequence shown with the 77 lb option

77 pound adjustable magnetic welding holder in an angled position

Shown: 77 lb option

For Real Fabrication Work

A Useful Extra Hand Around The Workshop.

Use it anywhere magnetic positioning can simplify the setup of suitable ferrous workpieces.

Steel Frames Tubing Plates Brackets Tack Welding Fabrication Assembly Pipe Installation Marking & Fit-Up

Choose Your Holding Option

Pick The Size That Fits Your Work.

Two versions are available with different magnetic holding ratings and overall dimensions.

48 lb option

48 lb / 22 kg

Approx. 4.33 × 2.48 × 0.55 in
(110 × 63 × 14 mm)

77 lb option

77 lb / 35 kg

Approx. 4.72 × 3.07 × 0.63 in
(120 × 78 × 16 mm)

Dimensions of the 48 pound adjustable magnetic welding holder

Dimension image shown: 48 lb option

Product Details

Specifications

Product Type

Adjustable Magnetic Welding Holder

Working Angle

20°–200°

Holding Options

48 lb / 77 lb

Adjustment

Central Pivot With Angle Scale

Locking Method

Hex Locking System

Compatible Surface

Suitable Ferromagnetic Steel

48 lb Size

4.33 × 2.48 × 0.55 in

77 lb Size

4.72 × 3.07 × 0.63 in

Package Includes

Magnetic Holder + Hex Wrench

Important: Magnetic holding performance depends on solid contact with a clean, compatible ferrous surface. Aluminum and other non-ferrous metals will not provide the same magnetic holding action. Do not weld too close to the magnet.

Before You Order

Frequently Asked Questions

What is this welding magnet used for?

It helps position and support compatible ferromagnetic steel during welding setup, fit-up, tack welding, fabrication and assembly.

Can I adjust the angle?

Yes. The two magnetic arms can be adjusted through a 20°–200° working range and then secured using the locking joint.

How do I lock the selected angle?

Set the holder to your desired position, then tighten the center locking mechanism with the included hex wrench.

Will it work on aluminum?

No. The magnetic holder requires a compatible ferromagnetic material such as suitable steel. Aluminum is non-ferrous and will not provide the required magnetic attraction.

What is the difference between the 48 lb and 77 lb versions?

They have different magnetic holding ratings and dimensions. The 48 lb version is approximately 4.33 × 2.48 × 0.55 inches, while the 77 lb version is approximately 4.72 × 3.07 × 0.63 inches.

Does it come with the wrench needed for adjustment?

Yes. A hex wrench is included for adjusting and locking the center joint.

How should I keep the magnetic faces working properly?

Keep the contact surfaces clean and remove accumulated metal shavings or debris after use so the magnet can make good contact with the workpiece.

Make Fit-Up Less Frustrating

Spend Less Time Holding The Workpiece.
Spend More Time Getting The Joint Ready.

Adjustable positioning, magnetic support and a lockable angle in one compact workshop tool—ready for the next steel fabrication job.

Choose Your Holding Power ↑ Select the 48 lb or 77 lb option in the product selector above.

Adjustable Angle Welding Magnet – 20°–200° Magnetic Welding Holder with Locking Hex System

Stop Fighting
Awkward Fit-Ups.